and a new look.
The Miravue VIP-1 provides AV distribution over wired and wireless Ethernet networking in the connected home or office. The VIP-1 encodes H.264 video up to its highest supported resolution (1080p) along with audio (Dolby 5.1). The result is a high quality video output signal with low network bandwidth requirements. For the ultimate in flexibility, the VIP-1 can be installed as a transmitter or receiver, and acts as an extension of the RTI control system, delivering IR and RS-232 control to devices.
* For the best performance:
The VIP-1 should be installed as a transmitter or a receiver. NOTE: While the VIP-1 may be installed as a transceiver (simultaneously transmitting and receiving video), this implementation should be tested with the devices and network equipment being used.
Wireless implementations should utilize a separate wireless network, and be limited to one or two Miravue VIP-1’s set to Unicast mode.
Systems requiring more than 6 VIP-1’s should use a managed network switch.
|Power Supply||5V, 2.4A or via PoE 802.3af|
|Mountable||Surface / Wall mount / Rack mount (w/ RMK-3 or RMK-12)|
|Dimensions HxWxD||5in(127mm) x 1.27in(32mm) x 3.8in(97mm)|
|Operating Temperature||0 to +40°C / +32 to +104°F|
|Operating Humidity||5% to 90% Non-condensing|
|Video Input||One HDMI|
|Video Output||One HDMI|
|Ethernet Ports||Two, 10/100Base-T, RJ45 (1 PoE, 1 Ethernet)|
|Wireless Ethernet||2.4GHz and 5Ghz a/g/b/n|
|Audio Output||One, Stereo Audio, 3.5mm|
|Control Signal Output||One, IR, 3.5mm jack, One, RS-232, 3.5mm 3pos, TCP/IP, RJ45|
|Compliance||HDMI / HDCP 1.x and 2.x|
|Compliance||HDCP 1.4 and HDCP 2.2|
|Supported Video Resolutions||480i, 480p, 576i, 576p, 720p@50/60Hz, 1080i@25/30Hz, 1080p@24/25/30/50/60Hz Video Codecs DivX, XviD, H.264 BP/MP/HP, VC-1 SP/MP/AP, MPEG-1/2, MPEG-4 SP/ASP, H.263P3, VP8, MVC, Theora, AVS, RV-8/9/10|
|Audio Formats||Stereo, Dolby Digital 5.1|
|Control Options||(VIP-1) IR, RS232, TCP/IP, CEC with OSD|
|Warranty||Three Years (Parts & Labor)|
All features and specifications subject to change without notice.
Fields marked with an asterisk ( * ) are required.