and a new look.
The R300-E is a robust UHF wireless bodypack system, suitable for any application where the convenience of a wireless headworn microphone is required. The system's BP-300 rugged metal bodypack transmitter is simple to use, and is powered by two AA batteries. The system's light-weight, double-ear hook HM3 headworn microphone is comfortable for extended daily use, and provides the user the convenience of hands-free presentations or performances. The receiver's dual antenna diversity helps avoid signal dropouts, and its durable metal frame and chassis can either be used on a tabletop, or rack-mounted with optional rack mounting hardware.
|Antennas||Flexible TNC 1/2 Wave|
|Audio Frequency Response||80 Hz - 18kHz +/-2dB|
|Balanced Line Level Output (RMS Adjustable)||10 - 100 mV|
|Battery Life||14 hours with (2) AA alkaline typical|
|Connector Type||1/4 inch unbalanced, 3-pin XLR balanced|
|Controls||on/off, Set, Up, Down, Sync|
|Distortion (@ 1 kHz, 40 kHz deviation)||Less than 1.0, 0.4 typical%|
|Dynamic Range||greater than 95dB|
|Element||HM-3 Omni-directional headworn|
|Number of Channels||32 per band, 8 Simultaneous|
|Operating Temperature Range||5º - 45º C (41º - 113º F)|
|Power Requirement||12-16 VDC, 500 mA max|
|Power Supply||12 VDC, 500mA max|
|Receiver Type||Synthesized PLL|
|RF Frequency Range||16MHz|
|RF Output||8 mW typical|
|RF Sensitivity (12 dB SINAD)||less than 1.0uV|
|Signal-to-Noise Ratio (A-weighted)||greater than 100dB|
|Squelch||Tone code plus Amplitude|
Fields marked with an asterisk ( * ) are required.